Super-Stretchable and High-Energy Micro-Pseudocapacitors Based on MXene Embedded Ag Nanoparticles.

The advancement of aqueous micro-supercapacitors offers an enticing prospect for a broad spectrum of applications, spanning from wearable electronics to micro-robotics and sensors. Unfortunately, conventional micro-supercapacitors are characterized by low capacity and slopy voltage profiles, limiting their energy density capabilities. To enhance the performance of these devices, the use of 2D MXene-based compounds has recently been proposed. Apart from their capacitive contributions, these structures can be loaded with redox-active nanowires which increase their energy density and stabilize their operation voltage. However, introducing rigid nanowires into MXene films typically leads to a significant decline in their mechanical properties, particularly in terms of flexibility. To overcome this issue, super stretchable micro-pseudocapacitor electrodes composed of MXene nanosheets and in situ reconstructed Ag nanoparticles (Ag-NP-MXene) are herein demonstrated, delivering high energy density, stable operation voltage of ≈1 V, and fast charging capabilities. Careful experimental analysis and theoretical simulations of the charging mechanism of the Ag-NP-MXene electrodes reveal a dual nature charge storage mechanism involving ad(de)sorption of ions and conversion reaction of Ag nanoparticles. The superior mechanical properties of synthesized films obtained through in situ construction of Ag-NP-MXene structure show an ultra stretchability, allowing the devices to provide stable voltage and energy output even at 100% elongation.

Heterogeneous Coprecipitation of Nanocrystals with Metals on Substrates.

ConspectusThe heterogeneous coprecipitation of nanocrystals with metals on substrates plays a significant role in both natural and engineered systems. Due to the small dimensions and thereby the large specific surface area, nanocrystal coprecipitation with metals, which is ubiquitous in natural settings, exerts drastic effects on the biogeochemical cycling of metals on the earth's crust. Meanwhile, the controlled synthesis of nanocrystals with metal doping to achieve tunable size/composition enables their broad applications as adsorbents and catalysts in many engineered settings. Despite their importance, complex interactions among aqueous ions/polymers, nanocrystals, substrates, and metals are far from being well-understood, leaving the controlling mechanisms for nanocrystal formation with metals on substrates uncovered.In this Account, we discuss our systematic investigation over the past 10 years of the heterogeneous formation of representative nanocrystals with metals on typical substrates. We chose Fe(OH)3 and BaSO4 as representative nanocrystals. Mechanisms for varied metal coprecipitation were also investigated for both types of nanocrystals (i.e., Fe, Al, Cr, Cu, and Pb)(OH)3 and (Ba, Sr)(SO4, SeO4, and SeO3)). Bare SiO2 and Al2O3, as well as those coated with varied organics, were selected as geologically or synthetically representative substrates. Through the integration of state-of-the-art nanoscale interfacial characterization techniques with theoretical calculations, the complex interactions during nanocrystal formation at interfaces were probed and the controlling mechanisms were identified.For BaSO4 and Fe(OH)3 formation on substrates, the local supersaturation levels near substrates were controlled by Ba2+ adsorption and the electrostatic attraction of Fe(OH)3 monomer/polymer to substrates, respectively. Meanwhile, substrate hydrophobicity controlled the interfacial energy for the nucleation of both nanocrystals on (in)organic substrates. Metal ions' (i.e., Cr/Al/Cu/Pb) hydrolysis constants and substrates' dielectric constants controlled metal ion adsorption onto substrates, which altered the surface charges of substrates, thus controlling heterogeneous Fe(OH)3 nanocrystal formation on substrates by electrostatic interactions. The sizes and compositions of heterogeneous (Fe, Cr)(OH)3 and (Ba, Sr)(SO4, SeO4, SeO3) formed on substrates were found to be distinct from those of homogeneous precipitates formed in solution. The substrate (de)protonation could alter the local solution's pH and the substrates' surface charge; substrates could also adsorb cations, affecting local Fe/Cr/Ba/Sr ion concentrations at solid-water interfaces, thus controlling the amount/size/composition of nanocrystals by tuning their nucleation/growth/deposition on substrates. From slightly supersaturated solution, homogeneous coprecipitates of microsized (Ba, Sr)(SO4, SeO4, SeO3) formed through growth, with little Sr/Se(VI) incorporation due to higher solubilities of SrSO4 and BaSeO4 over BaSO4. While cation enrichment near substrates made the local solution highly supersaturated, nanosized coprecipitates formed on substrates through nucleation, with more Sr/Se(VI) incorporation due to lower interfacial energies of SrSO4 and BaSeO4 over BaSO4. The new insights gained advanced our understanding of the biogeochemical cycling of varied elements at solid-water interfaces and of the controlled synthesis of functional nanocrystals.

Sulfate mineral scaling: From fundamental mechanisms to control strategies.

Sulfate scaling, as insoluble inorganic sulfate deposits, can cause serious operational problems in various industries, such as blockage of membrane pores and subsurface media and impairment of equipment functionality. There is limited article to bridge sulfate formation mechanisms with field scaling control practice. This article reviews the molecular-level interfacial reactions and thermodynamic basis controlling homogeneous and heterogeneous sulfate mineral nucleation and growth through classical and non-classical pathways. Common sulfate scaling control strategies were also reviewed, including pretreatment, chemical inhibition and surface modification. Furthermore, efforts were made to link the fundamental theories with industrial scale control practices. Effects of common inhibitors on different steps of sulfate formation pathways (i.e., ion pair and cluster formation, nucleation, and growth) were thoroughly discussed. Surface modifications to industrial facilities and membrane units were clarified as controlling either the deposition of homogeneous precipitates or the heterogeneous nucleation. Future research directions in terms of optimizing sulfate chemical inhibitor design and improving surface modifications are also discussed. This article aims to keep the readers abreast of the latest development in mechanistic understanding and control strategies of sulfate scale formation and to bridge knowledge developed in interfacial chemistry with engineering practice.